Aerosol Detection

Technique： Two simultaneously measuring light-scattering laser photometers

Dynamic Range：1.0 μg/m3 to >200 mg/m3

Performance

Operating Range：Up to 99.9995% efficiency Oil

Only Tester：Compatible with DOP, Paraffin, PAO & DEHS

Test time：Contact your TSI representative

Pressure Measurement

Technique： Electronic pressure transducer

Range： 0 to 250 mm H2O (0 to 2500 Pa), other ranges available upon request

Accuracy：±1% of full scale

Aerosol Flow (external vacuum flow required)

Volumetric flow：TSI Model 4045 flow meter with pressure and temperature

Flow Rate Range：Adjustable from 10 to 120 L/min Flow Rate Monitored and adjusted automatically to setpoint

Accuracy： ±2% of reading or 0.05 Std L/min, whichever is greater

Operating Range

Ambient pressure：75 to 110 kPa (absolute)

Ambient temperature：10°C to 35°C

Operating humidity：0% to 95%, non-condensing

Automation Interface

+ Modbus-based command set via Ethernet

+ Serial commands via RS-232

Pump / Filter Holder

Not included, custom designs and considerations are in the hands of the customer/integrator

Utility Requirements and Physical Parameters

Power：90 VAC to 250 VAC, 50 Hz to 60 Hz, 10 A max.

Compressed Air：80 psig, 7 scfm (550 kPa, 200 std. L/min average, 250 std. L/min max.)

Dimensions (L x W x H)：64.5 cm × 55.5 cm × 104.5 cm (25.4 in. × 21.9 in. × 41.2 in.)

Weight：100 kg (220 lbs)

Accessories and Options

+ Built-in neutralizer

+ Automatic aerosol generator refill

+ External pump (110V/220V)

+ Control unit with reference filter chuck for operating the 8150 outside the production line

Compliance

CE*, RoHS, North America Safety Mark (NRTL), optional CSA

 *Partly completed machinery according to EC – Directive for Machines 2006/42/EC, Annex II, 1. B, requires proper integration into production line especially regarding safety considerations

自动滤料测试仪

型号：8150

TSI 自动滤料测试仪被广泛用于质量控制和制造中。8130A自动滤料以有以其久经验证的性能、耐久性和可靠性被世界各地领先的过滤器和滤材制造商、测试实验室和政府机构所使用。

8150型在8130A型的基础上进行了改进升级，针对要求苛刻的在线生产测试应用进行了优化，为您完成高测试量的工作提供更快的测量速度和更短的周期时间。

它具有同步测试的两个光度计-分别在过滤器的上游和下游-消除了气溶胶浓度变化引起不确定性。8150还采用了创新的气雾剂输送概念，减少了阀门数量，提高了正常运行时间。对于特别狭窄的空间，光度计箱可以从基本单元分离或两个单元可以堆叠。8150通过PLC驱动接口操控运行，并包含一套全面的内部诊断系统，让您对滤料过滤效率的测量结果充满信心。

特性余优势

+适用于高测试量工作的更快测量速度和更短时间周期

+仪器测量结果与用于认证的8130A型测量结果具有极好的一致性

+占地面积小，易于集成到现有和新的生产线

+两个同时测量的光度计，实现最佳性能

+在检测到有缺陷的滤料后，恢复时间很短，可以最大限度地减少后续的错误故障

+支持符合美国42 CFR 84、GB2626和EN143/EN149等标准

+增加正常运行时间的智能设计